Water Mist Dust Collector

Calcium Hydroxide Equipment: Introduction to Water Mist Dust Collector

During the process of calcium oxide (CaO) reacting with natural water (H₂O) to convert into calcium hydroxide (Ca(OH)₂), a large amount of hot steam is generated. The gas entrains a certain amount of calcium hydroxide powder. If it is discharged into the air naturally, it will inevitably cause white pollution. After being dust-removed once by a pulse dust collector, it enters a calcium hydroxide water mist dust collector. After collecting the powder and mist two or three times, it becomes clean hot water vapor and is discharged into the atmosphere through a pipeline. The calcium hydroxide water collected in the water storage tank after preheating has a water temperature of 60 - 80 degrees Celsius. Some of the sediment is circulated into the primary pre-digestion by a general sewage pump to promote the chemical reaction of quicklime, so as to improve the quality of calcium hydroxide and achieve the goal of no sewage discharge.

Capacity: 1-12t/h

fineness：80-400 mesh

Application Scenario: The water mist dust collector is an environmentally friendly device that uses water mist to capture dust particles in the air. It is widely used in industrial dust control, mining, construction, metallurgy, and other fields.

Calcium Hydroxide Equipment: Product Features of the Water Mist Dust Collector

Stable production: The calcium hydroxide water mist dust collector is a patented product of Cronus. It has a compact and reasonable structure, occupies a small area, and has excellent digestion promotion and dust control effects. In the use of pulse dust collectors on the market, the quality requirements for filter bags are relatively high. The filter bags need to meet functions such as dust removal, alkali resistance, waterproofing, temperature resistance, pressure resistance, and non-stickiness simultaneously, and are extremely prone to damage. Once one filter bag is damaged during production, the machine needs to be shut down for maintenance immediately. Using a combination of a pulse dust collector and a preheated calcium hydroxide water mist dust collector can appropriately reduce the requirements for filter bags. Even if the filter bag is damaged during production, stable production can still be ensured, guaranteeing maintenance time.

Good cleaning effect: The length of the pipeline in the structure of the calcium hydroxide water mist dust collector is minimized as much as possible. Calcium hydroxide has the characteristic of being easy to adhere, and it is very difficult to maintain after calcification. In this equipment, the main body side wall is protected by a water curtain, and the circulating water and clean water are alternately used for cleaning to ensure cleaning to the greatest extent and promote the collection of spray, dust, and temperature. It also has a certain function of eliminating white smoke. This pulse preheating calcium hydroxide water mist dust collector adopts a combined dust removal process of primary pulse dust removal and secondary and tertiary water mist dust removal. The effects of dust removal and waste heat collection are obvious, meeting the emission standards.

Calcium Hydroxide Equipment: Parameter Comparison Table of Water Mist Dust Collector

* The above data is for reference only. For detailed information, please contact Cronus.

Calcium Hydroxide Equipment: Water Mist Dust Collector at Customer Site