CRRM2150 Raymond Grinding Mill

Introduction to CRRM2150 Raymond Grinding Mill

The CRRM2150 Raymond Gringding Mill  is adept at processing non-flammable and non-explosive ores with a Mohs hardness of 7 or below and a moisture content below 8%, such as limestone, marble, calcite, feldspar, barite, dolomite, maifanite, granite, bentonite, kaolin, bauxite, gypsum, talc, fluorite, coal gangue, iron oxide red, and iron ore, among others. It can efficiently grind and process these materials. The equipment allows for flexible adjustment of the final product particle size, ranging from 40 to 400 mesh. The maximum feed size it can accept is 30mm, with a 325 mesh pass rate of ≥90%, ensuring uniform particle size. Its production capacity falls within an efficient range of 10 to 40 tons per hour.

Capacity：10-40t/h

Fineness：40-400mesh

Maximum feed size：30mm

Case Study of CRRM2150 Raymond Grinding Mill

Calcite Processing: In the Powder Processing Industry A large powder material production plant specializes in the production and sales of calcite powder, with its products widely used in industries such as plastics, rubber, and coatings. In the past, the plant used traditional grinding equipment, which resulted in low production efficiency, uneven particle size of the finished product, and high energy consumption, leading to persistently high production costs. After extensive research and comparison, the plant ultimately chose the CRRM2150 Raymond mill. Following the installation, commissioning, and operation of the equipment, production capacity increased significantly. The original equipment could only produce approximately 8 tons per hour, whereas the CRRM2150 Raymond mill achieved a stable output of over 20 tons per hour, with a maximum capacity of up to 25 tons. This more than doubled the production efficiency, enabling the plant to produce more products in less time to meet market demand.

In terms of product quality, the CRRM2150 Raymond mill also performed exceptionally well. Its precise particle size adjustment capability and uniform particle size distribution ensured that the calcite powder produced had a more consistent particle size. Previously, due to uneven particle size, the plant's products faced limitations in high-end markets. Now, with superior product quality, the plant has successfully expanded its customer base in multiple high-end segments, and the product price has also increased.

Regarding costs, although the initial procurement cost of the CRRM2150 Raymond mill was relatively high, its high production efficiency and low energy consumption significantly reduced long-term operating costs. According to the plant manager, after adopting the new equipment, the annual electricity expenses were reduced by hundreds of thousands of yuan. Combined with the economies of scale from increased production, the unit production cost decreased by approximately 15%, yielding substantial economic benefits.

Limestone Processing: In the cement production industry, limestone is one of the primary raw materials, and its processing quality directly affects cement output and quality. A well-known cement plant has been committed to improving cement production efficiency and product quality. When upgrading its limestone processing equipment, the plant selected the CRRM2150 Raymond mill. Prior to using the CRRM2150 Raymond mill, the plant's limestone processing equipment suffered from insufficient production capacity and unstable finished particle size, leading to low cement production efficiency and significant fluctuations in product quality. After adopting the CRRM2150 Raymond mill, these issues were effectively resolved. The equipment's strong production capacity significantly increased limestone processing volume, providing ample raw materials for cement production and boosting cement output. According to statistics, after the new equipment was introduced, the plant's annual cement production increased from 1 million tons to 1.5 million tons, a growth of 50%.

In terms of cement quality, the limestone powder produced by the CRRM2150 Raymond mill had uniform particle size and could be precisely adjusted according to cement production requirements, resulting in more stable cement performance and higher strength. Professional testing institutions confirmed that cement produced using the limestone powder processed by the new equipment met and exceeded national standards in all performance indicators. As a result, the product's reputation in the market has improved, and its market share continues to expand. Additionally, the CRRM2150 Raymond mill contributed to environmental protection and energy conservation for the plant. Its closed production system and efficient dust removal devices effectively reduced dust emissions and improved the production environment. At the same time, the equipment's energy-saving design lowered energy consumption and reduced production costs.

Parameter comparison table of CRRM Raymond Grinding Mill

* The above data is for reference only. For detailed information, please contact Cronus.

CRRM2150 Raymond Grinding Mill Customer Site